If you did not miss ASUS ZenFone Max Pro (M1) review, then we recommend that you see it. The Taiwanese company has been able to make good money for your smartphone, which will be the easiest option for setting the Xiaomi Redmi Note 5. Appropriate appearance: screen, NFC, autonomy, good output and unmatched slot under the memory card. All you have to do is set as a printer – the ASUS ZenFone Max Pro (M2) and you will find that the quality of your photo is added. The smartphone's smartphone announces 11th of December and will show you ZenFone Max M2. Today, WinFuture's autoritous resource is depicted by the publishing and characterization features of the subscribers.
ASUS ZenFone Max M2 (ZB631KL) is inserted into a metal body, the rear panel is fitted with a round-top scanner of padding and a twisted double camera. It is not true that there was no need for any plastic bumps on the pockets, which were used to signal the signal. Careful design of the enclosure includes display of "monobrove" and diagonal 6 dimmers. The matrix resolution is 2340×1080 and the ratio of 19.5: 9 ratio. The hardware – Snapdragon 636 in the connector with 4 Gb of operative memory. The smartphone is equipped with a 32/64 GB flash drive and the "LED" sensor in the main chamber is a 13 mz sensor.
The bigger ASUS ZenFone Max Pro M2 (ZB633KL) capabilities adds an enclosure, and the plug-in module connects to the other LEDs and includes a light-emitting diode that is stylized under one of the subjects. From the ZenFone Max M2 it has a low-sized chip of the Snapdragon 660, 64/128 Gb of the permanent memory, the dual-core camera, the Sony IMX486 core sensor, is 12M and the 5mp sensor. It is clear that the main camera will receive a 3-axis EIS and a 5000m battery capacity.